Roland DWX-51D



Download PDF


Cuttable materialZirconia, Wax, PMMA, Composite resin, PEEK, Gypsum
Loadable workpiece shapeDisc type (with step)Step section: 98.5 mm (diameter), height 10mm
Body section: 95 mm (diameter), height max. 60mm
Pin typePin diameter: 6 mm
Operating speedXYZ axis:6 to 1800 mm/min.
(0.24 to 70.9 in./min.)
Spindle motorBrushless DC motor
Spindle speed6,000 to 30,000 rpm
Rotary axis travel angleA axis±360°
B axis±30°
Number of burs housed10
Attachable burShank diameter4 mm
Length40 to 55 mm
Compatible compressed air0.02 to 0.2 MPa
Control command setRML-1, NC code
Power requirementsAC 100 to 240 V ± 10%, 50/60 Hz , 2.0 A
(overvoltage category II, IEC 60664-1)
Power consumptionApprox. 200 W
Operating noiseDuring operation70 dB (A) or less (when not cutting)
During standby45 dB (A) or less
External dimensionsWidth x Depth x Height495 × 660 × 600 mm
(19.5 × 26.0 × 23.6 in.)
Weight67 kg (147.7 lbs.)
Installation environmentIndoor use, AltitudeUp to 2000 m (6,562 ft.)
Temperature5 to 40 °C (41 to 104 °F)
Humidity35 to 80% (no condensation)
Ambient pollution degree2 (as specified by IEC 60664-1)
Short-term temporary overvoltage1440 V
Long-term temporary overvoltage490 V
Included itemsPower cord, USB cable, Regulator, Air hose, Pin-type material adapter, Automatic correction jig, Detection pin, Torque screwdriver, Milling bur holders, Mounting screws, Hexagonal screwdriver, T-shaped hexagonal screwdriver, Dust collection hoses, Dust collection hose adapter, spanner, Roland Software Package CD, Torque screwdriver, Ferrite core, Manuals
System requirements for USB connectionOperating systemWindows Vista®, Windows® 7/8/8.1/10 (32 or 64 bit)
USB cableUse the included USB cable