Roland DWX-4W Wet



Download PDF


Cuttable materialGlass ceramics, Composite resin
Loadable workpiece shapeWidthMaximum 40 mm (1.57 in)
DepthMaximum 20 mm (0.79 in)
HeightMaximum 20 mm (0.79 in)
Operating speed6 to 1,800 mm/min. (0.24 to 70.9 in./min.)
Spindle motorJaeger high frequency spindle
Spindle speed15,000 to 60,000 rpm
Rotary axis travel angleA axis± 360°
Number of burs housed4
Attachable burShank diameter3 mm Dedicated milling bur for wet grinding
Compatible compressed air*Pressure0.7 to 1.0MPA (101-145psi)
Air Capacity114L/min (30gal) or more
Tank Capacity33L (8.7gal) or more
Control command setRML-1, NC code
Power requirementsAC 100 to 240 V ± 10%, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1)
Power consumptionApprox. 200 W
Operating noiseDuring operation70 dB (A) or less (when not milling)
During standby48 dB (A) or less
External dimensionsWidth x Depth x Height480 x 538 x 599 mm (18.9 x 21.2 x 23.6 in.)
Weight53 kg (116.8 lbs.)
Installation environmentIndoor use, AltitudeUp to 2,000 m (6,562 ft.)
Temperature5 to 28 °C (41 to 82.4 F)
Relative humidity35 to 80 % (no condensation)
Ambient pollution degree2 (as specified by IEC 60664-1)
Short-term temporary overvoltage1,440 V
Long-term temporary overvoltage490 V
Included itemsPower cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit
System requirements for USB connectionOperating systemWindows® 7/8/8.1/10 (32 or 64 bit)
USB cableUse the included USB cable