Roland DWX-4 - نوین ساخت سیس

توضیحات

DWX-4 Milling Machine Specifications
Cuttable Material		Zirconia (pre-sintered), Wax, PMMA, Lava™ Ultimate Restorative
Loadablework – piece shape	Block	Width x Depth: 76×38, Height: 10 to 22 mm
	PIN type	Width x Depth x Height: Maximum 85 x 40 x 22 mm
Operating speed		XYZ axis: 0.24 to 70.8 in./min. (6 to 1800 mm/min.)
Spindle motor		Brushless DC motor
Spindle speed		6,000 to 30,000 rpm
Rotary axis travel angle		A: ±360°
Number of tools housed		2
Attachable tool		Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air		0.02 to 0.2 MPa
Interface		USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set		RML-1, NC code
Power requirements	Voltage and frequency:	AC100 to 120 V/220 to 240 V ±10 %, 50/60 Hz (overvoltage category II, IEC 60664-1)
	Required power capacity:	2.0 A (100 to 120 V)/1.0 A (220 to 240 V)
Power consumption		Approx. 70 W
Operating noise	During operation:	70 dB (A) or less (when not cutting)
	During standby:	40 dB (A) or less
External dimensions	Width x Depth x Height:	13.4×14.4×16.0 in. (340×365×405 mm)
Weight		48.5 lbs (22 kg)
Installation Environment	Indoor Use, altitude:	up to 2000 m
	Temperature:	41 to 104 °F (5 to 40 °C)
	Relative humidity:	35 to 80 % (no condensation)
	Ambient pollution degree:	2 (as specified by IEC 60664-1)
	Short-Term Temporary Overvoltage:	1440 V
	Long-Term Temporary Overvoltage:	490 V
Included items		Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.